Note
If fluid is filled into the washer fluid reservoir, add windscreen
♦
washer fluid (in summer) or an antifreeze (if there is a risk of
frost).
If the vehicle is fitted with a headlight washing system and the
♦
headlights have plastic cover lenses with optics (made of pol‐
ycarbonate), use only liquids that do not damage the polycar‐
bonate for filling the washer fluid reservoir.
Spray nozzles of the windscreen washer system
The spray nozzles of the windscreen washer system are set to
the required setting by the manufacturer.
The water spray should strike the windscreen in a cone-shaped
pattern.
If the nozzle setting does not comply with the manufacturing set‐
ting, or if it has been replaced:
– Move the adjuster -1- upwards or downwards -arrows- and
while doing so adjust the spray nozzles of the windscreen
washer system in such a way that the correct injection jet is
reached.
Note
If the spray flows out unevenly or insufficiently, replace the spray
nozzle (repair measure).
Windscreen wiper arms: check home position, adjust if necessary
Set the end position of the windscreen wiper arms ⇒ Electrical
System; Rep. gr. 92 .
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
171
7. Body