Skoda Rapid NH 2013 Maintenance, Workshop Manual page 71

– Allow the engine oil to drain, catch the oil in a suitable con‐
tainer.
Note
Observe the disposal instructions!
– Locate a new oil seal -2- on a new oil drain plug -3-.
– Screw in the oil drain plug hand-tight and then tighten to the
required tightening torque.
– Screw in the new oil filter
⇒ "3.4.2 Replacing engine oil filter for petrol engines starting
from MY 2016", page 57
Tightening torque
Oil drain plug
– Top up with engine oil, specification
⇒ "3.10.5 Oil level, Volkswagen engine oil standards",
page 72 .
Draining engine oil after 2nd and any further oil change
– Unscrew oil drain plug -2- and dispose of sealing ring -3-.
Note
The oil drain plug is continued to be used after the 1st oil change.
– Allow the engine oil to drain, catch the oil in a suitable con‐
tainer.
Note
Observe the disposal instructions!
– Screw in the previous oil drain plug -2- with a new oil seal
-1-, and tighten to the required tightening torque.
– Screw in the new oil filter
⇒ "3.4.2 Replacing engine oil filter for petrol engines starting
from MY 2016", page 57
Tightening torque
Oil drain plug
.
.
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
Nm
30
Nm
30
67