Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
7.4
Checking body paintwork and under‐
body protection for damage (before
sale)
Scope of testing applies to:
Pre-Delivery Inspection -PDI- (Export)
Pre-sales Inspection - domestic (Czech Republic)
Delivery Inspection (Export)
The inspection of the underbody sealant and paintwork should
cover the following points:
– undamaged layer of PVC Plastisol
– undamaged paintwork
7.5
Check for corrosion
Carry out a visual inspection for corrosion when the doors, front
flap and tailgate are opened.
Checkpoints:
♦ Inner and outer door frame
♦ Area around the decorative strips
♦ Roof edge, windscreen
♦ Outer and inner A-pillar
♦ Front flap
♦ Wheelhousings
♦ Outer and inner tailgate
7.6
Inspecting plenum chamber and water
drain openings for dirt, cleaning if nec‐
essary
Carry out the visual inspection for soiling through the cover of the
plenum chamber. Remove the cover if it is necessary to clean the
plenum chamber (repair measure) ⇒ Body Work; Rep. gr. 66 .
Note
The water drain openings must not be blocked with wax or un‐
derbody sealant.
7.7
Windscreen wash/wipe system: check
Liquid in the washer fluid reservoir
The washer fluid reservoir must be filled up to the brim.
170
7. Body