Skoda Rapid NH 2013 Maintenance, Workshop Manual page 9

"Severe conditions" exist, for instance, if the vehicle is operated
continuously under one or several of the conditions stated below:
♦ Towing a trailer or when fitted with a roof rack.
♦ Operated on dusty, poor, muddy roads or roads treated with
road salt.
♦ Driven for short distances and at ambient temperatures below
freezing point.
♦ High cold start proportion
♦ Frequent extended operation in idle (e.g. taxies).
♦ Operation with diesel fuel with increased sulphur content.
– If one or several of these "severe conditions" applies, please
advise your customer whether it is necessary to have work
carried out between the normal service intervals, such as:
♦ Changing the engine oil before the normal specified interval.
♦ Cleaning or replacing the air filter element in the air filter hous‐
ing.
General information:
– Notify the customer so that he has each inspection carried out
at the right time and none are forgotten. This is necessary to
ensure the operational and functional safety of the vehicle and
to maintain claims to warranty.
– Draw the attention of your customer to the sticker affixed to
the side of the dash panel (including the service event next
due) - up to MY 2013 only.
– Insert a comment into the service schedule/in the DSP (Digital
Service Schedule).
– An oil change service should be undertaken at the prescribed
interval ⇒ "2.7 service intervals", page 37
– Notify the customer so that he has each inspection carried out
at the right time and none are forgotten. This is necessary to
ensure the operational and functional safety of the vehicle and
to maintain claims to warranty.
Service interval display
QI1 - Service display 5,000 km or 1 year (fixed)
QI2 - Service display 7,500 km or 1 year (fixed)
QI3 - Service display 10,000 km or 1 year (fixed)
QI4 - Service indicator 15,000 km or 1 year (fixed)
QI6 - Service indicator maximum 30,000 km or 2 years (flexible)
WARNING
The service display in the dash panel insert will be controlled
worldwide with these numbers.
The QG1/QG0 numbers now only control the hardware for
maintenance interval extension (including the oil level and oil
temperature sender and whether this is/is not present at the oil
sump).
Specifically, this can mean that a vehicle with PR number QI4
– service display of 15,000 km or 1 year (fixed) – can also have
the PR number QG1 – service interval extension.
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
.
Maintenance - Edition 06.2018
1. General points
5