Displaying A Timeout Code; Table 6-5 Timeout Code And Cause/Action - Hitachi HF-BX1000 Instruction Manual

6. TROUBLESHOOTING

6.6.3 Displaying a timeout code

A timeout code is displayed if a watchdog timer has timed out during system operation.
The status indication LEDs do not light for a timeout code. If another code was displayed
before a timeout code, the status indication LEDs remain lit.
Timeout code
88
< NOTE >
• A timeout code is displayed only if the operation for a timeout is set to "Not
reset" in the watchdog timer setting in the RAS Setup window.
• A timeout code flashes regardless of the display mode setting for the digital
LEDs for status indication.
• For how to set the RAS features setting window, watchdog timer and digital
LEDs for status indication display mode, refer to "3.1 RAS Setup Window" in
the HF-BX1000/1200 RAS FEATURES MANUAL.

Table 6-5 Timeout Code and Cause/Action

Cause
A watchdog timer has timed out.
Read the description in subsection
6.2.2 (3) and take action
accordingly.
6-26
Action