Countermeasures When The Capacity Of The Memory Dump File Is Insufficient - Hitachi HF-BX1000 Instruction Manual

7.3.3 Countermeasures when the capacity of the memory dump file is insufficient

Follow the flow chart below to take appropriate actions.
<Flow>
Start
Close the message box.
Is the virtual memory
Yes
setting the one
recommended for the
equipment?
Change the virtual memory
setting to the one recommended
for the equipment.
Restart the system.
Change the memory dump
setting to the one recommended
for the equipment.
Restart the system.
Reserve the area for saving a
memory dump.
Were you able to reserve
No
the area for saving a
memory dump?
No
Yes
End
<Description of the action>
Click OK in the message box.
Configure the virtual memory settings in Control Panel.
For details, see "7.3.5 (1) Configuring virtual memory".
For details, see "7.3.5 (2) Specifying a memory dump file".
Use the "createdmp" command.
For details, see "7.5 Maintenance Operation Commands".
7-9
7. MAINTENANCE OPERATION