8.3.2 Hardware status window
This equipment allows you to check the status of HDDs in the RAID1 system in the
Hardware status window. To display the Hardware status window, double-click the
hardware status icon on the notification area of the taskbar.
Note: By default, the icon is not shown in the notification area of the taskbar.
If you click the arrow at the side of the notification area, the icon will appear.
Furthermore, if you click Customize, you can set this icon to be displayed in the
notification area of the taskbar.
If both HDDs are working properly, the Hardware status window is displayed as follows.
Note: In the RAS software, an auxiliary memory unit in general, such as an HDD, is denoted
as a "drive".
Hardware status window
Hardware status icon