Starting The Equipment - Hitachi HF-BX1000 Instruction Manual

3. OPERATION

3.2 Starting the Equipment

For information about how to start the equipment for the first time after you purchase it or you
recover the equipment from failure, refer to the "GETTING STARTED" or the "SETUP
GUIDE".
For other cases, follow the procedure below to start the equipment:
1. Confirm that the plug of the power cord is connected to the outlet.
2. Turn on the power to the display.
3. Press the power switch. (See "2.1 Display and User Input Sections".)
4. When the power is turned on, the status lamp will light. (green)
After the above steps are complete, the equipment automatically goes through the startup
process until the logon screen appears.
For information about how to control the power using the LAN, see "3.6 Controlling the
Power Using the LAN".
3-2