Ras Information Display Command (Getrasinfo); Table 7-8 Information Displayed By The Getrasinfo Command - Hitachi HF-BX1000 Instruction Manual

7. MAINTENANCE OPERATION

7.5.4 RAS information display command (getrasinfo)

<Name>
getrasinfo - Displays the status of the equipment such as the status of the fan and the temperature
inside the chassis as well as the configuration information of the RAS software
<Syntax>
getrasinfo [/status | /setting] [/e file name]
<Feature>
The getrasinfo command displays the status of the equipment such as the status of the fan and the
temperature inside the chassis as well as the configuration information of the RAS software at the
command prompt. This command can also store the output in the specified file in the text format.
The following options are available for this command. If neither the /status nor the /setting
optionis used, the command displays both the information about the equipment and the settings of
the RAS software.
/status: Displays the status of the current equipment including the status of the fan and the
temperature inside the chassis.
/setting: The command displays the configuration information of the RAS software.
/e File name: The output is not displayed at the command prompt but instead stored in the file
specified by the file name in the text format.
Table 7-8 shows the information displayed by the getrasinfo command.

Table 7-8 Information Displayed by the getrasinfo Command

Item
Status of the equipment
RAS software settings
Description
• Fan status
• Temperature status
• RAID status (D model only)
• Drive status
• Automatic shutdown setting
• Watchdog timer setting
• Self-Monitoring, Analysis and Reporting Technology
(SMART) setting
• Drive power-on hours monitoring setting
• Digital LEDs for Status indication setting
• Pop-up display setting
7-20