Hitachi HF-BX1000 Instruction Manual page 96

Top menu
Boot Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
GateA20 Active
Interrupt 19 Capture
1st Boot
2nd Boot
3rd Boot
4th Boot
5th Boot
CD/DVD ROM Drive BBS Priorities
Hard Disk Drive BBS Priorities
UEFI Boot Drive BBS Priorities
Security Administrator Password
User Password
Save & Save Changes and Exit
Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Options
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
(5) Restoring the default settings
When you want to restore all items in the setup menu back to the default settings, follow
the procedure below:
[1] Start the setup menu. (See "(1) Starting the setup menu".)
[2] Open Save & Exit in the top menu. Move the cursor to Restore Defaults and press
Enter.
[3] The message, "Load optimized Defaults?" is displayed. Move the cursor to Yes. Press
Enter.
[4] Open Save & Exit in the top menu again. Move the cursor to Save Changes and Exit.
Press Enter.
[5] The message "Save configuration and exit?" is displayed. Press Enter.
This completes the procedure.
Setting item
Save Changes
Discard Changes
Built-in EFI Shell
Connected device name
Default value
1 Do not change this setting.
On
Disabled
Upon Request
Disabled
USB Floppy Configures the priority order of the devices
from which an OS is booted.
CD/DVD
Do not change this setting.
USB CD/DVD
Hard Disk
UEFI: Built-in
EFI Shell
Built-in DVD Not displayed when the device is not
drive connected.
Do not change this setting.
HDD1, HDD2
Built-in EFI Do not change this setting.
Shell
– If you set a password using this menu, you
cannot use the HDD if somebody sets a
different password during repair or
maintenance or you forget the password.
Consider carefully whether you need to set
a password as well as how to manage a
password.
– You can exit after saving the settings.
You can exit without saving the settings.
You can restart the system after saving the
settings.
You can restart the system without saving
the settings.
You can save the settings.
The settings are not saved.
You can restore the defaults.
You can save the changes as user defaults.
You can restore the user defaults.
A device that can be booted is displayed.
4-11
4. SPECIFICATIONS
(4/4)
Note