5. CHECKUP AND MAINTENANCE
When you install or remove an HDD, make sure the drive bay number is correct.
If you remove an HDD and install it in a different bay, a configuration information
mismatch occurs and the equipment may not start or the data stored on the HDD
may be lost.
(3) Installing an HDD
Follow the procedure described in "(2) Removing an HDD" in reverse to remove main
(4) After installing or replacing an HDD
If an additional HDD is installed or an HDD is replaced, the priority of starting the
media will be changed. Check the Hard Disk Drive BBS Priorities in the BIOS setup
menu to make sure that the HDD is given higher priority than other media.
For the BIOS setup menu, see "4.2 BIOS Setup."