Carefully read and fully understand the safety precautions below before operating
Operate the equipment by following the instructions and procedures described
in this manual.
Pay attention especially to safety precautions displayed on the equipment or in
this manual. Make sure you follow them. Otherwise, personal injury and
property damage including damage to the equipment may result.
A safety precaution is indicated by a heading as shown below. A heading is
either a safety alert symbol; a word such as "DANGER", "WARNING",
"CAUTION", or "NOTICE"; or a combination of both.
This is a safety alert symbol. This symbol is used to signify
potential hazards that may result in personal injury or death.
Make sure you follow the safety message that follows this
symbol in order to avoid possible injury or death.
DANGER: This symbol is used to indicate imminent hazards that
will highly likely result in serious personal injury or
WARNING: This symbol is used to indicate potential hazards that
CAUTION: This symbol is used to indicate potential hazards that
NOTICE: This symbol is used to indicate hazards that may result in
equipment or property damage but not personal injury.
The heading "NOTE" is used to indicate a cautionary note about handling and
operation of the equipment.
Do not attempt to perform any operation that is not described in this manual. If
there is any problem with the equipment, call your maintenance personnel.
Read this manual carefully and fully understand the directions and precautions
written in this manual before operating the equipment.
Keep this manual nearby so that you can reference the manual anytime you
Every effort has been made to specify precautions on the equipment and in the
manual. Nevertheless, unexpected incidents may occur. When you use the
equipment, you are asked not only to follow the instructions but also to use
your own judgment on safety.
may result in serious personal injury or death.
may result in minor or moderate personal injury.