32
System Description
Lifting the cover to the side opens the fuse carrier.
Figure 11: Opening the Fuse Carrier
Figure 12: Changing the Fuse
After changing the fuse, the fuse carrier is pushed back into its original position.
3.5.4.3
Fusing External
Field supply only with appropriate fuse protection!
Without overcurrent protection, the electronics can be damaged.
If you alternatively implement the overcurrent protection for the field supply with
an external fuse, an F 10 A fuse should be used.
For the external fusing, the fuse modules of the WAGO series 282, 2006, 281
and 2002 are suitable for this purpose.
Figure 13: Fuse Modules for Automotive Fuses, Series 282
Manual
Version 1.2.1
750-354/000-001 EtherCAT® Fieldbus Coupler, ID Switch
WAGO-I/O-SYSTEM 750