Table of Contents
Advertisement
Environmental specifications
Environmental specifications
Specification
Specification
1
Temperature range
Temperature range
Operating
Nonoperating
Relative humidity (noncondensing)
Relative humidity (noncondensing)
Operating
Nonoperating
1
All temperature ratings shown are for sea level. An altitude derating of 1.0° per 304.8 m (1.8°F per 1000 ft) to 3048 m (10,000 ft) is
applicable. No direct sunlight allowed.
For certain approved hardware configurations, the supported system inlet temperature range is extended:
5°C to 10°C (41°F to 50°F) and 35°C to 40°C (95°F to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F
per every 574 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft).
40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m
(2953 ft) to a maximum of 3048 m (10,000 ft).
Server specifications
Server specifications
Specification
Specification
Height
Depth
Width
Weight (maximum load, approximate values)
Weight (maximum load, approximate values)
Four-bay LFF non-hot-plug drive model
Four-bay LFF hot-plug drive model
Eight-bay SFF hot-plug drive model
Power supply specifications
Power supply specifications
Depending on the installed options and the regional location where the server was purchased, the server can be configured with one of
the following power supplies:
HPE 350W E-star 1.0 Non-hot-plug Power Supply (85% efficiency)
HPE 350W Gold Non-hot-plug Power Supply (92% efficiency)
HPE 500W Flex Slot Platinum Hot-plug Power Supply
Value
Value
—
10°C to 35°C (50°F to 95°F)
-30°C to 60°C (-22°F to 140°F)
—
10% to 90%
28°C (82.4°F) maximum web bulb temperature
5% to 95%
38.7°C (101.7°F), maximum wet bulb temperature
Value
Value
36.83 cm (14.50 in)
47.50 cm (18.70 in)
17.50 cm (6.89 in)
—
15.24 kg (33.59 lb)
17.60 kg (38.80 lb)
15.50 kg (34.17 lb)
HPE ProLiant ML30 Gen10 Server Maintenance and Service Guide
133
Advertisement
Table of Contents
