Service Guide
Section 5: Adjustments
Adjusting the Cassette Release Mechanism
Tools Required
• 2 mm long-shaft Allen wrench
• CR 360 Tool Kit (SK000098): contains Sub Kit 1 (SK000152)
Sub Kit 1
Part Name
Cassette Eject POS Tool Kit
(SK000152)
Adjustment Procedure
[1] Disconnect the scanner from the main power.
[2] Remove the scanner cover. (See
[3] Place the Tech plug in its position. (See
Page
26.)
[4] Remove the roof assembly. (See
120
Description
Aluminum ruler gauge
Aluminum T-piece slider gauge
Long 7 mm pipe socket wrench
Removing the Scanner Cover on Page
Activating the Scanner Without the Cover (Laser Deactivated) on
Removing the Roof Assembly on Page
Picture
25.)
83.)
6H4869