Table of Contents
Advertisement
Chapter 2 - Installation
Manufacturer
Southbay Holdings Limited
11th Fl., 15, Lane 347, Jong Jeng Rd.
Shin Juang City, Taipei County
Taiwan, R.O.C.
Attn: Eva Lin
Tel. 886-2-2832 3339
Fax. 886-2-2206 0081
E-mail:
eva@south-bay.com.tw
GU-Tech., LLC . - A Member of OVIS GroupTel/Fax :
732 918 8221 Mobile: 718 909 4093
www.OVIS.COM.TW
In case of missing information in the manufacturer's WEB site (product
specifications, ordering issues, etc.), it is highly recommended to contact the
manufacturer's sales representative directly.
2.1.4
Pole Mounting the ODU
The ODU can be mounted on a 1" to 4" pole using one of the following options:
A pole mounting kit is supplied with each unit. The kit includes a special
clamp and a pair of threaded rods, flat washers, spring washers and nuts.
There are two pairs of threaded holes on the back of the unit, enabling to use
the mounting kit for installing the unit using either vertical or horizontal
polarization. The clamp enables installing the unit on diverse pole diameters
from 1" to 4".
A Tilt Pole Mounting kit, providing a tilt range of ±15° is available. The Tilt kit
can be attached to the ODU and be mounted on a 1" to 4" pole using two 9/16"
wide metal bands.
2.1.4.1
Pole Mounting the ODU Using the Clamp
Figure 2-1
clamp and threaded rods.
BreezeMAX PRO 5000 CPE
Table 2-1: Approved Category 5E Ethernet Cables
www.GU-TECH.COM
and
Figure 2-2
illustrate how to mount an ODU on a pole, using the
Part Number
TSM2404A0D
15
Installing the ODU of the CPE
Product Manual
- Quick Links:
- Figure 1-1: Cpe Outdoor Units
Hide quick links:
Advertisement
Table of Contents
