Mounting The Bts On The Carriage - Alvarion BreezeMAX Extreme System Manual

Chapter 2 - Installation
To install the Carriage on a pole larger than 4'':
Assemble the tilt bracket on the BTS and fasten its four screws (see
1
"Assembling the Tilt Bracket on the BTS" on page
Thread the four metal bands through the grooves on the BTS carriage and
2
fasten them (see
Attach the carriage to the pole and fasten the metal bands (see
3
Insert the tilt control screws into the middle-side hole of the carriage on both
4
sides
2.2.5

Mounting the BTS on the Carriage

At this stage, after mounting the BTS on the carriage, use the Tilt bracket to tilt
and rotate the BTS as required.
CAUTION
The weight of BTS is 10.7 Kg and the weight of the Pole Mounting Kit is approximately 5 kg. Be sure
to plan the installation accordingly. It is recommended to use a harness to lift the units.
Install the unit using the supplied kit only.
BreezeMAX Extreme
Figure 2-11).
(Figure 2-11).
Metal bands
Tilt control screws
Figure 2-11: Installed Carriage with Metal Bands
39).
45
BTS Installation
Figure 2-11).
System Manual