Figure 2-3: Su-Ra-2.4 Bottom Panel; Figure 2-4: Au-Re-900 Bottom Panel - Alvarion BreezeACCESS 900 System Manual

Chapter 2 - Installation
To connect the IF cable:
1. Connect one end of the coaxial IF cable to the IF connector on the
bottom panel of the unit
2. Verify that the length of the IF cable is sufficient to reach the
Interface Unit.
3. The IF cable connectors should be sealed properly to protect against
rain and moisture
2-8

Figure 2-3: SU-RA-2.4 Bottom Panel

Figure 2-4: AU-RE-900 Bottom Panel

BreezeACCESS 900 System Manual rev 1.1