Page 2
Statement of Conditions The information contained in this manual is subject to change without notice. Alvarion Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or equipment supplied with it.
Page 3
LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. (c) ALVARION SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY PURCHASER’S OR...
Page 4
BreezeACCESS SU-M -900 Installation Guide Limitation of Liability. (a) ALVARION SHALL NOT BE LIABLE TO THE PURCHASER OR TO ANY THIRD PARTY, FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND,...
Page 5
Important Notice FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against h armful interference when the equipment is operated in a residential environment notwithstanding use in commercial, business and industrial environments.
Page 6
BreezeACCESS SU-M -900 Installation Guide Radio The instrument transmits radio energy during normal operation. To avoid possible harmful exposure to this energy, do not stand or work for extended periods of time in front of its antenna. The long -term characteristics or the possible physiological effects of Radio Frequency Electromagnetic fields have not been yet fully investigated.
Page 7
♦ Alvarion Ltd. reserves the right to alter the equipment specifications and descrip tions in this publication without prior notice. No part of this publication shall be deemed to be part of any contract or warranty unless specifically incorporated by reference into such contract or warranty.
BreezeACCESS SU-M -900 Installation Guide viii Installation Guide Table of Contents System Description Introducing Bree zeACCESS SU -M -900 ............1-2 System Specifications..................1-3 Radio and Modem ....................1-3 Data Communications ................... 1-4 Configuration and Management ................1-4 Connectors ......................1-5 Mechanical and Electrical ..................
Page 9
Table of Figures Installation Guide Table of Figures Figure 1-1: SU-M-900 Unit .................... 1-2 Figure 2-1: Connecting the Unit ..................2-5 Figure 2-2: SU-M-900 Front Panel Connections ............2-5...
System Description Chapter 1 System Description About This Chapter This chapter introduces the BreezeACCESS SU-M-900 system. It includes the following section: ♦ Introducing BreezeACCESS SU-M -900 , page 1-2, introduces the SU - M-900 and its functionality. ♦ System Specifications, page 1-4, lists the technical and physical specifications of the SU-M-900.
BreezeACCESS SU-M Installation Guide Introducing BreezeACCESS SU-M-900 The BreezeACCESS SU-M-900 is a small, high -powered unit designed for mobile use. Enclosed in a hardened, field-tested container, the BreezeACCESS SU-M-900 is specially designed to provide a constant network connection for law enforcement and emergency services personnel. Figure 1-1: SU -M -900 Unit NOTE: The SU- M-900’s case may only be opened by an authorized technician.
System Description System Specifications Radio and Modem Table 1Error! No text of specified style in document.-1 : 900 MHz Radio Specifications Item Description Frequency Band 902 – 928 MHz ISM band Operation Mode Time Division Duplex (TDD) Radio Access Method FH-CDMA Standard Compliance FCC Part 15.247...
BreezeACCESS SU-M Installation Guide Data Communications Standard Compliance IEEE 802.3 CSMA/CD VLAN support Based on IEEE 802.1Q Layer-2 Traffic Prioritization Based on IEEE 802.1p Layer-3 Traffic Prioritization ToS according to RFC791 MIR (Maximum Information Rate) Programmable per user, separately for uplink and downlink. and CIR (Committed Information Range: 0 - 2200 Kbps, 1 Kbps resolution.
System Description Connectors Connector Description Antenna N Type jacks (ONLY ANT 1 ACTIVE ) 10BaseT Ethernet (RJ 45) jack DC IN 2 pins Molex DC plug Mechanical and Electrical Dimensions 30 x 20 x 12 cm (11.8 x 7.9 x 4.7 in) Weight 4.5 kg (9.9 lbs) Electrical...
Installation Chapter 2 Installation About This Chapter The BreezeACCESS SU-M-900 system is comprised of three main components, as follows: ♦ The SU-M-900 unit. ♦ The PC aboard the vehicle (not included) ♦ The Antenna. This chapter describes the physical installation procedures for the S U-M- 900 system and includes the following sections: ♦...
BreezeACCESS SU-M Installation Guide Packing List SU-M-900 units are shipped with the following units and accessories: ♦ The SU-M-900 unit ♦ An omni antenna with mounting kit and cable ♦ A 12 VDC power cable with 250 V, 3 A fuse Items Required for Installation The following list comprised items required to install the S U-M-900 that are not included with the installation package.
Page 19
Installation Installing the SU-M-900 Unit The SU -M-900 unit must be installed securely in the vehicle. Four screws are needed to mount the S U-M-900 to either a sheet metal or a wooden surface. The position of the SU-M-900 unit must enable it to be easily connected to the PC, the omni antenna and the power supply.
Page 20
BreezeACCESS SU-M Installation Guide Installing the Antenna The SU -M-900 Antenna consists of the following components: ♦ An antenna base & whip combination ♦ A lock nut ♦ An O-Ring washer ♦ A bushing assembly with an O-Ring. Ø To install the antenna on the roof or body of a car: Position the antenna as far from the emergency ligh ts as possible while still on a relatively flat surface.
Installation Connecting the Unit This section describes how to connect the unit to its power supply, Ethernet connection and antenna, as shown in the figure below: Figure 2-1 : Connecting the Unit Figure 2-2: SU-M-900 Front Panel Connections Ø To connect the SU-M-900 Unit: Once the SU-M-900 unit is installed in the vehicle, connect the 12 VDC powe r cable to the unit’s DC IN port.
Page 22
BreezeACCESS SU-M Installation Guide Wire the other end of the cable to the power source, ensuring that the cable is secure and out-of-the-way for its protection . Proper polarity must be observed, with the black cable attached to negative and the red to positive.
Preliminary Configuration Chapter 3 Preliminary Configuration About This Chapter This chapter describes how to set the basic parameters of the BreezeACCESS SU-M-900 and includes the following sections: ♦ Configuration Applications, page 3-2, provides an overview of how to change parameter settings. ♦...
Address) based on the unit’s MAC Address, which is marked on the front panel of the unit. Refer to BreezeACCESS 900 System Manual for more information on accessing and using the Monitor program and on configuring parameters. Refer to the BreezeCONFIG ACCESS User’s Manual for more information on...
Preliminary Configuration Configuring Basic Parameters The Basic Configuration menu of the Monitor program includes all the parameters necessary for the initial operation of BreezeACCESS SU-M-900. YOU MUST PERFORM A SITE SURVEY AND SPECTRUM SWEEP PRIOR TO CONFIGURING THE AU’S IN ORDER TO DETERMINE THE AVAIABLE CLEAR CHANNELS.
BreezeACCESS SU-M Installation Guide Verifying Proper Operation This section describes how to ensure that the SU-M-900 unit is fully operational. Ø To verify unit operation: Verify that the PWR LED on the SU-M-900 unit is lit. Confirm that the PC is operational. Send and receive a test message or PING test from the vehicle to confirm connection to the wireless link.