Setup
Operating Instructions 650-10 - 03.0 - 08/2016
8.8
Inserting the machine head
WARNING
Risk of injury from tipping machine upper part!
Crushing is possible.
Secure the machine upper part against tipping
when you transport the machine.
Fig. 83: Inserting the machine head
①
(1) - Transport eye
To insert the machine head:
1.
Using the transport eye (1), lift the machine upper part and
insert it into the cut-out on the table top.
2.
After the upper part has been placed in position, immediately
connect the bracket (2) which prevents the upper part coming
loose if the table top is tipped.
(2) - Clamping plate
②
125