Table of Contents
Advertisement
Setup
Operating Instructions 650-10 - 03.0 - 08/2016
3.
Turn the stand (2) the right way up.
4.
Align the pedals.
5.
For ergonomic reasons, align the pedals laterally so that the
center of the main pedal (4) is directly beneath the needle.
The stand strut (5) is provided with slotted holes to allow alig-
nment of the pedal.
6.
Loosen the screws (3).
7.
Adjust the height of the Pedal rods so that in the home position
the pedal slope is about 10°.
8.
Tighten the screws (3).
9.
Insert the thread reel holder (6) into the hole in the tabletop
(1) and secure it with a nut and washer.
10. Align thread reel holder and thread guide.
Important
The thread guide must be positioned vertically above the thread
reel holder.
121
Hide quick links:
Advertisement
Table of Contents
