Settings via software (OP7000)
Mode
PROGRAMMING
Operating Instructions 650-10 - 03.0 - 08/2016
To set the fullness:
1.
Select the type of fullness.
The type of fullness selected is displayed in an activated
control field within the symbol.
2.
If a higher or lower degree of fullness is required, use the
arrow keys to display more buttons.
3.
Input the fullness using the buttons 0 to 16.
Other program parameters
A tap on the Other program parameters button will bring up an
overview of all available parameters.
Fig. 64: Other program parameters
Parameters
Backtack at Start
Meaning
Bartack at seam beginning
Value range: 1 (= on) or 0 (= off)
99