DURKOPP ADLER 650-10 Operating Instructions Manual page 93

Settings via software (OP7000)
EDIT mode Other sewing step parameters
Operating Instructions 650-10 - 03.0 - 08/2016
Parameters
Backtack at Start
Backtack at End
Thread Trimmer
A tap on the Other sewing step parameters button will bring up
an overview of all available parameters.
Fig. 58: Other sewing step parameters
Meaning
Bartack at seam beginning
Value range: 1 (= on) or 0 (= off)
Bartack at seam end
Value range: 1 (= on) or 0 (= off)
Thread trimmer
Value range: 1 (= on) or 0 (= off)
91