52
Symbol
Meaning
Stitch length
Value range: 1.0 – 4.0 mm
• Use
• Use
Thread tension
Value range: 1 – 99
• Use
• Use
Curve support
Value range: 0 – 6
• Use
• Use
Length of the current step in mm
5.5.1
Creating a program by keyboard input
Information
Before the S key is pressed, program creation can be canceled
at any time by pressing the ESC key.
1.
Set all the parameters for each step.
2.
Operate the knee lever.
The controller switches to the next step.
Once all steps are complete:
3.
Press the S key.
The sewing program is saved.
Service settings via software (OP3000)
/
to select the parameter
/
to change the stitch length
/
to select the parameter
/
to change the thread tension
/
to select the parameter
/
to change the curve support
Operating Instructions 650-10 - 03.0 - 08/2016