DURKOPP ADLER 650-10 Operating Instructions Manual page 102

Mode
PROGRAMMING
100
Parameters
Backtack at End
Thread Trimmer
Grading Factor
Other sewing step parameters
A tap on the Other sewing step parameters button will bring up
an overview of all available parameters.
Fig. 65: Other sewing step parameters
Parameters
Foot Stroke Alternation
Foot Pressure
Settings via software (OP7000)
Meaning
Bartack at seam end
Value range: 1 (= on) or 0 (= off)
Thread trimmer
Value range: 1 (= on) or 0 (= off)
Grading factor
Value range: 0.0 – 6.0 (% per size)
Meaning
Sewing foot alternation whilst the needle
is in the sewing material
Value range: 0 – 2.5 mm
Sewing foot pressure
Value range: 1 – 10
Operating Instructions 650-10 - 03.0 - 08/2016