84
6.4.2
Sewing process
1.
Select a sewing program ( p. 79).
The program number and name of the sewing program are
displayed on the user interface. If no name has been saved
for the selected sewing program, <No Name> is displayed.
2.
Select the right or left piece to be sewn by tapping
3.
Select sewing material size ( p. 80).
4.
Push the pedal forwards and sew the seam.
The sewing progress is displayed graphically in the left pane
as a red bar.
Fig. 53: Sewing process
The remaining sewing length per sewing step is displayed:
Correcting the fullness before or during the seam
1.
Press Pedal to position 0.
2.
Change the fullness correction using the buttons + F% or - F%.
3.
Push the pedal forwards and sew.
The changed fullness value is applied and displayed.
Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016
.