Table of Contents
Advertisement
Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016
2.
Tap <No Name> and input a name.
Information for inputting text: ( p. 68).
Information
If no name is input for the sewing program, <No Name> continues
to be displayed.
The first sewing step is displayed with its number in the left
pane.
3.
Input all the parameters for the first sewing step.
4.
Sew the first sewing step, or manually input the length of the
sewing step using the seam length measurement parame-
ter.
5.
Switch to the next sewing step by tapping on the number of
the first sewing step or by using the knee lever.
The second sewing step is displayed with its number in the
left pane.
Fig. 60: Creating a new seam program (PROGRAMMING) (2)
6.
Repeat sewing step 2 until all the sewing steps have been
programmed.
93
Hide quick links:
Advertisement
Table of Contents
