122
8.6
Completing the tabletop
Fig. 81: Completing the table top
②
③
(1) - Upper part support
(2) - Hinge mountings
(3) - Edge strips
To complete the tabletop:
1.
Insert the oblique fittings (4).
2.
Insert the rubber corners (5) into the tabletop.
3.
Using 4.5 x 15 (4x) screws, tighten the hinge mountings (2).
4.
Using 4.5 x 55 (8x) screws, screw the edge strips (3) to the
tabletop.
5.
Insert the machine head support (1).
①
(4) - Oblique fittings
(5) - Rubber corners
Operating Instructions 650-10 - 03.0 - 08/2016
Setup
⑤
④