DURKOPP ADLER 650-10 Operating Instructions Manual page 22

20
Switching on the machine
This is how you switch on the machine:
1. Press the main switch (1) down to position I.
 POWER LED illuminates, MESSAGE LED flashes briefly.
 The splash screen appears on the display:
• On the left, the control panel firmware
• On the right, the controller software version
 The machine performs a reference run and is ready for
sewing when the display shows the start screen.
Switching off the machine
This is how you switch off the machine:
1. Press the main switch (1) up to position 0.
 The control panel shuts down. When the POWER LED goes
out, the machine and the controller are disconnected from
the power supply.
Operating Instructions 650-10 - 03.0 - 08/2016
Operation