56
Changing further parameters for the selected sewing
program
This menu allows further parameters for the current sewing
program to be changed.
Change further parameters as follows:
Use
to select the field
1.
/
2.
Press the OK key.
The submenu opens.
Use
to select the desired parameter.
3.
/
4.
Press the OK key to activate or deactivate the parameter, or
use
to change its value and press OK to confirm it.
/
Symbol
Meaning
Thr. Tens. (thread tension)
Stitchlen. (stitch length)
Foot Press. (sewing foot pressure)
Fulln. Corr. (fullness correction)
Start Tack (bartack at seam beginning)
End Tack (bartack at seam end)
Thread Trim (thread cutter)
Service settings via software (OP3000)
.
Operating Instructions 650-10 - 03.0 - 08/2016