Menu For Other Settings - DURKOPP ADLER 650-10 Operating Instructions Manual

44
Assign a function to the upper softkey as follows:
1. Press the numeric key under the desired function
and the upper softkey at the same time.
 The function is assigned to the upper softkey
and can be called up by pressing the key.
5.3.2

Menu for other settings

Use / to select the field
1.
2. Press the OK key.
Use / to select the desired parameter.
3.
4. Press the OK key to select the parameter.
Change values using the / keys.
5.
6. Press the OK key to confirm.
Press or ESC to exit the menu.
7.
Symbol Meaning
Alternate (sewing foot alternation)
Value range: 0.0 – 2.5 mm
Foot Press. (sewing foot pressure)
Value range: 1 – 10
Start Tack (bartack at seam beginning)
Value range: 1 (= on) or 0 (= off)
End Tack (bartack at seam end)
Value range: 1 (= on) or 0 (= off)
Thread Trim (thread cutter)
Value range: 1 (= on) or 0 (= off)
Service settings via software (OP3000)
.
Operating Instructions 650-10 - 03.0 - 08/2016