DURKOPP ADLER 650-10 Operating Instructions Manual page 45

Service settings via software (OP3000)
Operating Instructions 650-10 - 03.0 - 08/2016
Fig. 18: Softkey menu
To select a function in the softkey menu:
1. Press the numeric key under the desired function.
Symbol Meaning
Manual bartack on
• Press key 1 and keep it pressed for a manual
bartack
Bartack suppression on or off
• Press key 2
The bartacks are switched on or off
Needle position up or down
• Press key 3
The needle is up or down when sewing stops
Automatic step progression on or off
(available only in Automatic mode)
• Press key 4.
Automatic step progression is enabled/disabled
whilst sewing a seam
Quick programming
Press key 5
Quick programming starts
Winder mode on or off
• Press key 6
• Press the Pedal forwards
The hook thread is wound on
• Press the Pedal halfway back
Winder mode is ended
2. Exit menu using ESC.
43