62
5.8
Service mode
More information on the contents of Service mode can be found
in the Service Instructions.
5.9
Update machine software
Information
In machines with software version up to and including A.3.27 a
bootloader update must be performed. In machines with software
version from A.3.29 the software update can be performed imme-
diately.
1.
Download the bootloader software from the Dürkopp Adler
website (https://software.duerkopp-adler.com/maschinen-
programme.html).
2.
Unpack the file on a USB key.
2 folders are created: bootscr and update.
3.
Insert the USB key (2) in the USB port (3) at the control (1).
4.
Switch on the machine.
The update starts. The LEDs (4) light up.
The update is finished when only the POWER LED glows.
Service settings via software (OP3000)
Operating Instructions 650-10 - 03.0 - 08/2016