Settings Via Software (Op7000); Control Panel Op7000 - DURKOPP ADLER 650-10 Operating Instructions Manual

Settings via software (OP7000)

Operating Instructions 650-10 - 03.0 - 08/2016
6 Settings via software (OP7000)
6.1

Control panel OP7000

All settings for the 650-10 are performed using the OP7000 control
panel. If your machine is controlled by a different control panel,
continue on  p. 37.
Fig. 42: Control panel OP7000
The activation of the sewing motor and the stepper motors is
performed by the DAC comfort.
Up to 999 sewing programs can be saved.
Each sewing program can contain up to 30 sewing steps.
Each sewing step can be assigned various parameters such as
stitch length, fullness values, curve support, thread tension, seg-
ment length etc.
The sewing programs are displayed continuously whilst sewing is
in progress. Programs can be mirrored for the other side of the
sewing material.
All functions and inputs are triggered by touching the screen.
Numeric values for the individual parameters and text for the
program names can be input in the individual operating modes.
65