Sewing Process - DURKOPP ADLER 650-10 Operating Instructions Manual

Service settings via software (OP3000)
5.4.1

Sewing process

Start the sewing process as follows:
1. Push the pedal forwards and sew.
 The following appears on the display:
Fig. 20: Sewing process (1)
① ②
(1) - Program bar (2) - Current step
The parameter values for the current step are shown on the
display.
The program bar (1) shows the progress of the seam.
The number under the current step (3) shows the outstanding
length of the step.
The program bar shows half the current step in bold.
Fig. 21: Sewing process (2), current step
Completed steps are shown fully in bold.
Fig. 22: Sewing process (3), completed step
48 Operating Instructions 650-10 - 03.0 - 08/2016