DURKOPP ADLER 650-10 Operating Instructions Manual page 133

Setup
Operating Instructions 650-10 - 03.0 - 08/2016
Connecting the control panel OP7000
Fig. 89: Connecting the control panel OP7000
①
(1) - Cable
(2) - Table top opening
To connect the control panel OP7000:
1. Tighten the control panel (8) to the bracket (7) and align it.
2. Insert the plug for the cable (6) at the control panel, guide it
through the opening in the tabletop (5) to the controller, and
connect it to the socket (X170b).
② ③
(3) - Retainer
(4) - Control panel
④
131