Table of Contents
Advertisement
Service settings via software (OP3000)
Operating Instructions 650-10 - 03.0 - 08/2016
Symbol
Meaning
Thread tension
Value range: 1 – 99
The thread tension can be altered before starting
sewing.
The altered value applies throughout the entire sewing
program
• Use
• Use
Other parameters
Foot Press. (sewing foot pressure)
Fulln.Corr. (fullness correction)
• Use
• Press the OK key.
• Use
sewing foot pressure.
• Select the parameter using the OK key
• Change values using
• Press the OK key to confirm.
• Press
Program bar
Length per step in mm, or a dash
(-) if no automatic step progres-
sion
ESC, F, S
No function assigned
Before you can start the sewing process, you need to switch to
st
the 1
step.
Proceed as follows to switch to the 1
1.
Sew, press the knee lever or press the OK key.
The program switches to the 1
/
to select the parameter
/
to change the thread tension
/
to select the parameter
/
to select the fullness correction or the
/
or ESC to exit the menu.
st
step:
st
step.
.
47
Hide quick links:
Advertisement
Table of Contents
