72
7.6
Inserting the machine head
Fig. 33: Inserting the machine head
①
②
(1) - Machine head
(2) - Tabletop cutout
To insert the machine head:
1.
Insert the machine head (1) into the tabletop cutout (2) at
a 45° angle.
2.
Insert the upper hinge parts (4) into the rubber inlays (3).
3.
Tilt the machine head.
(3) - Rubber inlays
(4) - Upper hinge parts
Operating Instructions 827/827-M - 01.0 - 02/2019
Setup
④
③