DURKOPP ADLER 650-10 Operating Instructions Manual page 38

36
Altering • Press fullness key or additional pedal.
The selected fullness value is activated.
the fullness
At seam end
Remove • Press the Pedal fully back and keep it there.
The end bartack is sewn (if activated).
the sewing
The threads are cut (if activated).
material
The machine stops in the 2
The needle is up. The sewing feet are raised.
• Remove the sewing material.
• Release the Pedal.
The sewing feet are lowered.
nd
Operating Instructions 650-10 - 03.0 - 08/2016
Operation
position.