Inserting The Machine Head - DURKOPP ADLER M-Type Delta D867 Operating Instructions Manual

156
7.8

Inserting the machine head

WARNING
Risk of injury from moving parts!
The machine head is very heavy.
Crushing possible.
Ensure that your hands are not jammed when
inserting the machine head.
NOTICE
Property damage may occur!
Cable may sustain damage and impair the operation of
the machine.
Always lay the cables so as not to create any chafing or
pinching points.
Fig. 74: Inserting the machine head (1)
①
(1) - Rubber inlays
To insert the machine head:
1. Tighten the upper hinge parts (2) onto the machine head.
2. Guide the cables through the tabletop with great care so as
not to create any chafing or pinching points.
3. Insert the machine head from above at an angle of 45°.
4. Insert the upper hinge parts (2) into the rubber inlays (1).
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
(2) - Upper hinge parts
Setup
②