DURKOPP ADLER 650-10 Operating Instructions Manual page 100

Mode
PROGRAMMING
98
To set the sewing material size:
Setting the fullness
Fig. 63: Setting the fullness
Buttons for manually inputting the fullness are displayed in the left
pane.
Symbol/button
Settings via software (OP7000)
Meaning
Input the fullness.
The fullness setting is displayed by a
button highlighted in red.
Select the type of fullness:
• Upper (upper transport)
• Lower (lower transport)
The fullness selected is displayed in an
activated control field.
Display of further buttons for inputting the
fullness. The buttons 0 to 16 are available
for input.
Operating Instructions 650-10 - 03.0 - 08/2016