EDIT mode Other program parameters
90
To set the fullness:
1.
Select the type of fullness.
The type of fullness selected is displayed in an activated
control field within the symbol.
2.
If a higher or lower degree of fullness is required, use the
arrow keys to display more buttons.
3.
Input the fullness using the buttons 0 to 16.
A tap on the Other program parameters button will bring up an
overview of all parameters available in EDIT operating mode.
Fig. 57: Other program parameters
Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016