DURKOPP ADLER 650-10 Operating Instructions Manual page 85

Settings via software (OP7000)
AUTO mode Other program parameters
Operating Instructions 650-10 - 03.0 - 08/2016
2. Tap the OK button.
 The correction value is saved, and the previous user inter-
face is displayed again.
Information
If changed in AUTO operating mode, the new correction value
remains active until the controller changes to the next program.
A tap on the Other program parameters button will bring up an
overview of all available parameters.
Fig. 52: Other program parameters
Parameters
Foot Pressure
Meaning
Sewing foot pressure
Value range: 1 – 10
83