Setting The Needle Thread Tension - DURKOPP ADLER 650-10 Operating Instructions Manual

28
Fig. 8: Thread tension
①
②
③
(1) - Identical needle thread and bobbin thread tension
(2) - Bobbin thread tension higher than needle thread tension
(3) - Needle thread tension higher than bobbin thread tension
4.7.1

Setting the needle thread tension

Fig. 9: Setting the needle thread tension
①
(1) - Main tensioner
You set the needle thread tension as follows:
1. Set the main tensioner (4) via the control panel so that an
even stitch pattern is achieved.
When the thread is cut, the main tensioner (4) is opened auto-
matically.
Operating Instructions 650-10 - 03.0 - 08/2016
Operation
DA150018_V52_XX