Connecting The Control Panel - DURKOPP ADLER 650-10 Operating Instructions Manual

130
8.9.5

Connecting the control panel

Connecting the control panel OP3000
Fig. 88: Connecting the control panel OP3000
① ②
(1) - Cable
(2) - Table top opening
Connect the OP3000 as follows:
1. Screw the control panel (4) on the bracket (3) and align it.
2. Plug the plug for the cable (1) on to the control panel, through
the opening in the table top (2) to the control cabinet, and
connect it to the socket (X170 Panel).
③
(3) - Retainer
(4) - Control panel
Operating Instructions 650-10 - 03.0 - 08/2016
Setup
④