Signal Words And Symbols Used In Warnings - DURKOPP ADLER 650-10 Operating Instructions Manual

Requirements to
be met by the
personnel
Operation Inspect the machine while in use for any externally visible damage.
Safety
equipment
10
All the warnings and safety signs on the machine must always be
in legible condition. Do not remove!
Missing or damaged warnings and safety signs must be replaced
immediately.
Only qualified specialists may:
• set up the machine
• carry out maintenance work and repairs
• carry out work on electrical equipment
Only authorized persons may work on the machine and they must
first have understood these instructions.
Stop working if you notice any changes to the machine. Report
any changes to your supervisor. Machines must no longer be used
if they are damaged.
Safety equipment should not be removed or deactivated. If it is
essential to remove or deactivate safety equipment for a repair
operation, it must be refitted and put back into service immediately
afterward.
2.2 Signal words and symbols used
in warnings
Warnings in the text are distinguished by color bars. The color
scheme based on the severity of the danger. Signal words indicate
the severity of the danger.
Operating Instructions 650-10 - 03.0 - 08/2016
Safety