Table of Contents
Advertisement
Settings via software (OP7000)
MAN mode Setting the fullness
Operating Instructions 650-10 - 03.0 - 08/2016
The following table lists the symbols and buttons for manually
setting the fullness.
Symbol/button
To set the fullness:
1.
Select the type of fullness.
The type of fullness selected is displayed in an activated
control field within the symbol.
2.
If a higher or lower degree of fullness is required, use the
arrow keys to display more buttons.
3.
Input the fullness using the buttons 0 to 16.
Meaning
Inputting the fullness.
The fullness setting is displayed by a but-
ton highlighted in red.
Select the type of fullness:
• Upper (upper transport)
• Lower (lower transport)
The fullness selected is displayed in an
activated control field.
Display of further buttons for inputting the
fullness. The buttons 0 to 16 are available
for input.
73
Hide quick links:
Advertisement
Table of Contents
