Error message display and remedies
This section describes error messages and remedies.
Error messages are displayed when certain failures occur during printer operation.
If an error that can be displayed occurs, the printer may display the following error messages on the operation panel and stop
operation.
Cover Open
Maint. CoverL Open
Maint. CoverR Open
Undefined Media
Media Slant
Media Cut Error
Print End
Media End
Check Media Size
Media End
Shake W Cartridge
Shake KMCY Cartridge
Shake KMCYW Cartridge
Shake ALL Cartridge
[******] Ink Low
[******] Ink End
[******] No Cartridge
138
Error message display and remedies
Display
Front cover is open.
Close Front cover.
Left Maintenance cover is open.
Close Maintenance cover.
Right Maintenance cover is open.
Close Maintenance cover.
Media detection has failed. (Stops operation)
Reload the media.
Media is fed obliquely. (Stops operation)
Reload the media.
The media was not cut. (Stops operation)
The Media has run out. (Stops operation) Printing was completed.
To continue printing, load a new media.
"Loading the media" P. 29
Media ran out while printing. Load a new media.
"Loading the media" P. 29
Note
If the printer detects media end while printing, it will not print a complete image.
In such cases, Mutoh does not guarantee the print quality at the end of the print.
Agitate the White (Wh) ink cartridge (ink bag).
Agitate the Black (K), Magenta (M), Cyan (C), and Yellow (Y) ink cartridges (ink
bags).
Agitate the Black (K), Magenta (M), Cyan (C), Yellow (Y), and White (Wh) ink
cartridges (ink bags).
Agitate all ink cartridges (ink bags).
Agitate the Black (K), Magenta (M), Cyan (C), and Yellow (Y) ink cartridges (ink
bags).
Slot * ink is low. Get a replacement cartridge (bag) ready.
"Replacing ink" P. 102
Ink has run out. (Stops operation)
Replace with a new ink cartridge (ink bag).
"Replacing ink" P. 102
Ink cartridge (High capacity ink pack adapter) is not inserted. (Stops
operation)
Insert Ink cartridge (High capacity ink pack adapter).
Description