Table of Contents
Advertisement
Messages and Error Messages
4
Messages and Error Messages
This section describes messages displayed during normal printer operation or when errors occur, and solutions to the messages.
Status messages
This section describes messages displayed during printer normal operation.
When the product is operating correctly, each operation status is displayed on the operation panel as below.
Ready to Print
Media End
Receiving
Converting
Printing
Print Remain: XXX.Xm
Remain Time: XXX.Xmin
Cleaning **%
Moving Origin Pos.
** Initializing **
*** Press 2sec. ***
Lever Up
User: Type ** OK?
Media Initial
Perform Daily Maint.
Life Times [Pump]
Life Times [CR Motor]
Life Times [PF Motor]
136
Status messages
Display
Standby (Media is loaded).
Standby (Media is not loaded).
"Loading the media" P. 29
Receiving data.
Analyzing data.
Under printing.
Displays the length of the data that has not been printed in meters for the
data currently being printed.
Displays the time remaining to print in minutes for the data currently being
printed.
Cleaning the head. Please wait a while.
The print head is moving to the original printing position in the Origin setup
menu. Please wait a while.
Initializing the setting in the Initialization menu. Please wait a while.
The [Cleaning] key or the [Nozzle Check] key is pressed for less than 2
seconds.
Press the key for more than 2 seconds again.
Set the media, and then lower the Media loading lever.
Initializing the media.
Please wait a while.
(** represents the set User type.)
Make sure to perform daily maintenance when prompted.
"Continuously using printer after daily maintenance" P. 117
The operational life of the pump motor has almost expired.
(Continues operation)
Contact your local MUTOH dealer.
The operation life CR motor has almost expired.
(Continues operation)
Contact your local MUTOH dealer.
The operational life of the PF motor has almost expired.
(Continues operation)
Contact your local MUTOH dealer.
Description
Advertisement
Table of Contents
Troubleshooting
