MUTOH ValueJet VJ-1638UR Operation Manual page 133

Steps for High capacity ink pack adapter
[1]
3 sec.
3 sec.
[2]
[3]
[4]
[5]
[6]
x 3
Good
NotGood
Make sure you agitate the ink bag after you prepare it.
• Turn the ink plug upward and wait for three seconds.
• Next, turn the ink plug downward and wait for three seconds.
• Repeat that three times.
Note
You do not have to agitate varnish ink before use.
Slide the smart chip card into the tab on the High capacity ink pack
adapter to install it.
Lower the lock lever on the High capacity ink pack adapter and insert
the ink bag.
• Insert all the way to the end.
Confirm that the ink bag is inserted all the way and is locked.
Confirm that the lock lever on the High capacity ink pack adapter is in
its original position.
Place the light-shielding cover over the ink bag.
Note
Insert the light-shielding cover inside the High capacity ink pack adapter to only cover
the ink bag.
Performing initial charging after head cleaning 133